Dobinsons MRA Height-Adjustable Lift Kit for Ford Ranger PX1 & PX2 (2011–2018)

Description

DETAILS

Dobinsons Basic MRA Height Adjustable Lift Kit to suit Ford Ranger PX1/2 2011-2018

NOTE:
– A 100mm Lift is achievable with extra components. A 100mm Lift will most likely NOT pass a NZ certification as this will decrease the suspension droop travel, it is up to the customer to set these any higher than a 75mm Lift.
– Not Suitable for PX3 Models

Please use the drop down menu to select your model type, lift amount and the correct spring rates depending on your vehicles accessories.

Type: Ranger
Model: PX1/2
Year: 08/2011 – Mid 06/2018
Suspension Type: Coil Spring Front / Leaf Spring Rear
Front Lift: 35mm – 75mm Lift
Detail: 
– 4×4 Chassis Mounted Front Bump Stop Models Only
– Turn-Key Start Models Only
– Also Suits 4×2 High-Rider
– Monotube Remote Reservoir Shock Absorbers
– These front struts are pre-assembled in our workshop and ready to go.

COMPONENTS

Front:
2x Dobinsons MRA Shocks – MRA19-A092
1x Pair Dobinsons Springs
2x Trundles Strut Top Mounts – TOP3

Rear:
1x Trundles Extended Shackles

IMPORTANT!

The stock Upper Control Arms can hit the chassis seam on droop in some models.
With the vehicle on the ground, you can remove the top hat crush tube and shorten it around 10mm then refit. This in turn can shorten the shock extended length to give clearance – Some top hats have a longer crush tube which seems to be the cause of this.

Explore more from our collection.